GA Figure 513:

3-Way 100% Port Plug Valve

Size: 3" to 16"
Valve Type: Eccentric Plug Valve
Fluid: Wastewater

The GA Industries Figure 513 is a ruggedly designed 3-way plug valve used to divert inlet flow to one of two outlet ports or to simultaneously connect all three ports.The valve has a port area equivalent to 100% of the inside area of the adjacent pipe for low headloss.The rubber coated tapered plug can be externally adjusted for long term sealing and the self-adjusting shaft packing can be replaced without disturbing the bonnet.The valve can be operated by a manual lever or gearbox or automatically by an electric motor or pneumatic actuator.

  • Heavy-duty, epoxy lined and coated cast iron body
  • 175 PSI pressure rating in all sizes
  • 100% port area for low headloss
  • Rubber coated ductile iron plug
  • Direct seating tight shutoff up to full rated pressure
  • Self-adjusting shaft packing
  • Stainless steel external fasteners
  • Body and Bonnet: Cast iron, ASTM A126 Class B
  • Plug: Ductile Iron, ASTM A536 Buna-N rubber Coated
  • Bearings: Permanently lubricated 316 stainless steel
  • Shaft Packing: Multiple Buna-N self-adjusting U-cups
  • External Fasteners: 304 Stainless Steel
Corrosion Protection
  • Lined and coated with 2-part epoxy, 10 mil DFT minimum
Installation, Maintenance and Operating Instructions
Product Bulletin
Fig 513 Bulletin Rev 10-8-22
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now

Reliable wastewater valves designed for rigorous service

GA Industries sewage and wastewater valves are specially designed to accommodate the rigorous demands of the sewage collection, pumping and treatment process.

Whether a large regional sewage pump station, a small lift station or in-plant process pumping, GA Industries line of wastewater check, pump control and surge relief valves provide reliable service under difficult operating conditions. GA Industries ECO-Centric® plug valves handle solids and stringy material and are used in sewage and wastewater systems for pump, pipeline or process isolation.

Our full range of sewage and wastewater air valves automatically release air and sewage gas from forcemains to maintain pumping efficiency and minimize pipeline corrosion.

GA Figure 513:
3-Way 100% Port Plug Valve
GA Figure 513 Image
Size: 3" to 16"
Valve Type: Eccentric Plug Valve
Fluid: Wastewater

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries