GA Figure 517R8:

Eccentric Plug Valve, Standard Rectangular Port

Size: 24” to 48” flanged, 24” to 42” Mechanical Joint
Valve Type: Eccentric Plug Valve
Fluid: Wastewater, Water

GA Industries Figure 517 are standard rectangular port non-lubricated, rubber seated eccentric plug valves with a minimum of 80% port area.The valves fully meet the requirements of AWWA Standard C517 and are typically used for isolation service in sewage and wastewater systems and treatment plants.

The valve's rugged iron body has a weld overlaid corrosion resistant nickel seat.A Buna-N rubber coating is transfer molded and vulcanized to the ductile iron plug.The plug is supported by upper and lower PTFE coated 316 stainless steel bearings that ride in a 316 stainless steel bushing in the body and bonnet.

Figure 517 standard rectangular port plug valves seat tightly up to rated pressure in both directions.

The valve can be actuated by a quarter-turn manual worm gear or an electric motor operator.Operators are selected and sized based on operating conditions, factory mounted on the valve and tested as an assembly.

  • Fully conforms to AWWA C517
  • Rectangular port with minimum 80% port area
  • Weld overlaid 95% pure nickel body seat
  • Rubber coated ductile iron plug
  • Corrosion resistant and low friction PTFE lined bearings
  • Adjustable shaft packing
  • Lifting eyes and feet to facilitate handling
  • Body and Bonnet (Cover): Cast Iron
  • Body Seat: Weld Overlaid 95% Nickel
  • Plug: Ductile Iron, Buna-N Rubber Coated
  • Shaft Bearings: PTFE Coated Stainless Steel
  • Thrust Bearings: PTFE
  • Seals: Buna-N Rubber
Corrosion Protection
  • Internal and external coated with NSF-61certified 2-part epoxy, minimum 6 mil DFT
Drawings and Parts List
30 to 48in MJ Buried Wormgear 2in Nut
Fig 517 24in FLG Drawing PL-1076
Fig 517 24in MJ Drawing PL-1078
Fig 517 30-36in MJ Drawing PL-1020
Fig 517 30in FLG Drawing PL-1016
Fig 517 36in FLG Drawing PL-1017C
Fig 517 42-48in FLG Drawing PL-1042
Fig 517 42-48in MJ Drawing PL-1044
Figure 517 30 to 48in FLG Exposed Wormgear Handwheel
Installation, Maintenance and Operating Instructions
Figure 517R Plug Valves
Product Bulletin
Plug Valve Bulletin
Sample Specification
Figure 517 Plug Valves Rev B
Technical Datasheet
Figure 517R8 Standard Port Data Sheet 517-04B
Figure B517 24
Std Rectangular Port Plug Valve Headloss Ga-517-hl3 Rev B
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now
Clean Water

Dependable valves that meet your clean water needs

From the raw water intake to the filtration plant to the finished waster distribution and storage system, GA Industries valves have been providing dependable service in large and small water systems. GA Industries pump control, check and relief valves mitigate damaging pressure surges and eliminate slam and bang that can result from the operation of water pumps.

Our full range of pilot operated control valves regulate distribution system pressure and prevent overflow of storage tanks and reservoirs. Air trapped in water pipelines can reduce system efficiency and exacerbate pressure surges. Our wide range of automatic air valves ensures we have the right valve to maintain an air free system.

And when it’s necessary to isolate a pump, process or section of pipeline, you can depend on GA Industries butterfly valves for reliable flow shutoff.


Reliable wastewater valves designed for rigorous service

GA Industries sewage and wastewater valves are specially designed to accommodate the rigorous demands of the sewage collection, pumping and treatment process.

Whether a large regional sewage pump station, a small lift station or in-plant process pumping, GA Industries line of wastewater check, pump control and surge relief valves provide reliable service under difficult operating conditions. GA Industries ECO-Centric® plug valves handle solids and stringy material and are used in sewage and wastewater systems for pump, pipeline or process isolation.

Our full range of sewage and wastewater air valves automatically release air and sewage gas from forcemains to maintain pumping efficiency and minimize pipeline corrosion.

GA Figure 517R8:
Eccentric Plug Valve, Standard Rectangular Port
GA Figure 517R8 Image
Size: 24” to 48” flanged, 24” to 42” Mechanical Joint
Valve Type: Eccentric Plug Valve
Fluid: Wastewater, Water

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries