GA Industries
GA Figure B517:
100% Port Full Flow Eccentric Plug Valve, Round Port, Exposed Service
GA Figure B517:
100% Port Full Flow Eccentric Plug Valve, Round Port, Buried Service
GA Figure B517R8:
Eccentric Plug Valve, Standard Rectangular Port, Flanged or MJ
GA Figure B517RF:
Eccentric Plug Valve 100% Rectangular Port, Flanged or MJ
GA Figure 517T:
Eccentric Plug Valve, NPT End Round Port
GA Industries Figure B517RF are rectangular port non-lubricated, rubber seated eccentric plug valves with a port area equivalent to at least 100% of the inside area of the adjacent pipe.The valves fully meet the requirements of AWWA Standard C517 and are typically used for isolation service in sewage and wastewater systems and treatment plants It's 100% port area affords lower headloss than the same size standard port plug valve.
The valve's rugged ductile iron body has a weld overlaid corrosion resistant nickel seat.A Buna-N rubber coating is transfer molded and vulcanized to the ductile iron plug.The plug is supported by upper and lower 316 stainless steel bearings and upper and lower thrust bearings with grit excluders.
Figure B517 rectangular 100% port plug valves seat tightly in both directions.
The valve can be actuated by a quarter-turn manual worm gear or an electric motor operator.Operators are selected and sized based on operating conditions, factory mounted on the valve and tested as an assembly.
GA Figure B517:
100% Port Full Flow Eccentric Plug Valve, Round Port, Exposed Service
GA Figure B517:
100% Port Full Flow Eccentric Plug Valve, Round Port, Buried Service
GA Figure B517R8:
Eccentric Plug Valve, Standard Rectangular Port, Flanged or MJ
GA Figure B517RF:
Eccentric Plug Valve 100% Rectangular Port, Flanged or MJ
GA Figure 517T:
Eccentric Plug Valve, NPT End Round Port
We can help you find the correct representative for your industry & location.
Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.
Set-up Now
GA Industries sewage and wastewater valves are specially designed to accommodate the rigorous demands of the sewage collection, pumping and treatment process.
Whether a large regional sewage pump station, a small lift station or in-plant process pumping, GA Industries line of wastewater check, pump control and surge relief valves provide reliable service under difficult operating conditions. GA Industries ECO-Centric® plug valves handle solids and stringy material and are used in sewage and wastewater systems for pump, pipeline or process isolation.
Our full range of sewage and wastewater air valves automatically release air and sewage gas from forcemains to maintain pumping efficiency and minimize pipeline corrosion.