GA Figure 517RF-US:

AIS Compliant 100% Port Eccentric Plug Valve

Size: 24" and 30" Flanged and Mechanical Joint
Valve Type: Eccentric Plug Valve
Fluid: Wastewater

GA Industries Figure 517RF-US are rectangular port, non-lubricated, rubber-seated eccentric plug valves with a port area equivalent to at least 100% of the inside area of the adjacent pipe.The valves fully meet the requirements of AWWA Standard C517 and are AIS Compliant.The valves are typically used for isolation service in sewage and wastewater pumping stations, treatment plants and forcemains.The valve's 100% port area affords lower headloss than the same size standard port plug valve.

The valve has a rugged cast iron body with a weld overlaid body seat of tough and corrosion resistant nickel.A Buna-N rubber coating is transfer molded and vulcanized to the ductile iron plug.The plug is supported by upper and lower PTFE coated 316 stainless steel bearings that ride in 316 stainless steel bushings in the body and cover.

The valve can be manually operated by a quarter turn worm gear actuator for exposed or buried service.Electric motor, pneumatic or hydraulic actuators can be supplied for automatic operation.Actuators are sized and selected for the operating conditions, factory mounted on the valve and tested as an assembly.

  • AIS Compliant
  • Fully conforms to AWWA Standard C517
  • Rectangular port with minimum 100% port area
  • Weld overlaid 95% pure nickel body seat
  • Buna-N rubber coated ductile iron plug
  • Corrosion resistant, low friction PTFE/316SS bearings
  • Adjustable shaft packing
  • Lifting eyes to facilitate handling and feet for ease of storage
  • Body and bonnet (cover): Cast Iron
  • Body Seat: Weld Overlaid 95% Nickel
  • Plug: Ductile Iron, Buna-N Rubber Coated
  • Shaft Bearings: PTFE Coated 316 Stainless Steel
  • Thrust Bearings: PTFE
  • Seals: Buna-N
Corrosion Protection
  • Internal and external ferrous surfaces of valve coated with NSF-61 certified 2-part epoxy, minimum 6 mil DFT
Drawings and Parts List
Fig 517 24in FLG 100% Port Drawing PL1040
Fig 517 24in MJ 100% Port Drawing PL-1136
Fig 517 30in FLG 100% Port Drawing PL-1139
Fig 517 30in MJ 100% Port Drawing PL-1159
Installation, Maintenance and Operating Instructions
Figure 517R Plug Valves
Technical Datasheet
Fig 517RF-US 100% Port Data Sheet 517RF-US-01
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now

Reliable wastewater valves designed for rigorous service

GA Industries sewage and wastewater valves are specially designed to accommodate the rigorous demands of the sewage collection, pumping and treatment process.

Whether a large regional sewage pump station, a small lift station or in-plant process pumping, GA Industries line of wastewater check, pump control and surge relief valves provide reliable service under difficult operating conditions. GA Industries ECO-Centric® plug valves handle solids and stringy material and are used in sewage and wastewater systems for pump, pipeline or process isolation.

Our full range of sewage and wastewater air valves automatically release air and sewage gas from forcemains to maintain pumping efficiency and minimize pipeline corrosion.

GA Figure 517RF-US:
AIS Compliant 100% Port Eccentric Plug Valve
GA Figure 517RF-US Image
Size: 24" and 30" Flanged and Mechanical Joint
Valve Type: Eccentric Plug Valve
Fluid: Wastewater

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries