GA Figure A517-US:

AIS Compliant Plug Valve, Round Port Exposed Service

Size: 3" to 24"
Valve Type: Eccentric Plug Valve
Fluid: Wastewater

The GA Industries ECO-Centric Figure A517-US Eccentric Plug Valve is fully compliant with the requirements of American Iron & Steel.The valve’s flow efficient round port provides lower head loss and higher capacity than any standard rectangular port plug valve.Epoxy coated ductile iron body with a welded nickel body seat provide durability and corrosion resistance.Self-adjusting shaft packing can be replaced without valve disassembly.

Figure A517-US exposed service eccentric plug valves are available with a worm gear with visual position indicator, handwheel (optional chainwheel) or 2” nut.Electric motor and pneumatic operators are available.

  • High strength ductile iron body and cover
  • Bi-directional seating up to rated pressure
  • Upper and lower grit excluders for extended bearing life
  • Self-adjusting U-cup shaft packing seals at low and high pressure
  • Type 316 stainless steel external fasteners
  • Body & Cover: Ductile Iron, ASTM A536 Grade 65-45-12
  • Body Seat: Weld Overlaid 95% Pure Nickel
  • Plug Coating: Buna-N Rubber
  • Shaft Bearings: Stainless Steel, Type 316, Self-Lubricating
  • External Fasteners: Type 316 Stainless Steel
Corrosion Protection
  • Internal and external 2-part epoxy, 6 mil DFT
Drawings and Parts List
Fig A517-US 14-24in Flgd Wormgear PL-1005
Fig A517-US 3-4in Flgd Wormgear PL-1000
Fig A517-US 3-8in Flgd Direct Nut PL-1001
Fig A517-US 6-12in Flgd Wormgear PL-1004
Product Bulletin
Figure 517-US AIS Plug Valve Bulletin
Sample Specification
Fig 517 Plug Valve Spec Rev C
Technical Datasheet
Figure A517-US FLG Data Sheet A517-01F
General Information
Fig 517 Round Port Plug Valve Headloss 2-27-20
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now

Reliable wastewater valves designed for rigorous service

GA Industries sewage and wastewater valves are specially designed to accommodate the rigorous demands of the sewage collection, pumping and treatment process.

Whether a large regional sewage pump station, a small lift station or in-plant process pumping, GA Industries line of wastewater check, pump control and surge relief valves provide reliable service under difficult operating conditions. GA Industries ECO-Centric® plug valves handle solids and stringy material and are used in sewage and wastewater systems for pump, pipeline or process isolation.

Our full range of sewage and wastewater air valves automatically release air and sewage gas from forcemains to maintain pumping efficiency and minimize pipeline corrosion.

GA Figure A517-US:
AIS Compliant Plug Valve, Round Port Exposed Service
GA Figure A517-US Image
Size: 3" to 24"
Valve Type: Eccentric Plug Valve
Fluid: Wastewater

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries