GA Figure 7125:

Tilting Disc Check Valve, Plain

Size: 6" to 36"
Valve Type: Check Valve
Fluid: Water

The GA Industries Tilting Disc Check Valve features a streamlined design and full flow area for lower head loss than conventional swing check valves.Its energy efficient operation is combined with a short 40-degree disc stroke that provides quick closing valve to minimize hammer.

The valve employs offset seating technology to smoothly lift the disc off of the seat during opening and into the seat during closing without binding or sticking.

The offset also design divides the disc so hydraulic forces acting on the upper third of the disc counteract the lower two thirds for an inherent cushioning effect.

  • Full port waterway with streamlined flow path
  • Stable airfoil shaped disc
  • No packing glands or external weights or springs
  • Upstream and downstream inspection ports
  • Class 125 Body: Cast Iron, ASTM A126 Class B
  • Class 250 Body: Ductile Iron, ASTM A536 Grade 65-45-12
  • Disc (6' to 14'): Lead Free Bronze, C95400
  • Disc (16' to 36'): Ductile Iron, ASTM A536 Grade 65-45-12 Ductile Iron
  • Body Seat Ring: Lead Free Bronze, C95400
  • Disc Seat Ring: Lead Free Bronze, C95400
  • Pivot Pins: Stainless Steel, Type 303
  • Pivot Bushings: Lead Free Bronze, C95400
  • External Fasteners: A307 Steel, Zinc Plated
Corrosion Protection
  • Standard: Internal/external coated with NSF-61 certified 2-part epoxy
Drawings and Parts List
Fig 7125 6-14in TD-1003
Fig 7125T 16-42in Drawing TD-1055
Sample Specification
Tilting Disc Check Valve Rev B
Technical Datasheet
Figure 7125 Data Sheet 7125-01D
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now
Clean Water

Dependable valves that meet your clean water needs

From the raw water intake to the filtration plant to the finished waster distribution and storage system, GA Industries valves have been providing dependable service in large and small water systems. GA Industries pump control, check and relief valves mitigate damaging pressure surges and eliminate slam and bang that can result from the operation of water pumps.

Our full range of pilot operated control valves regulate distribution system pressure and prevent overflow of storage tanks and reservoirs. Air trapped in water pipelines can reduce system efficiency and exacerbate pressure surges. Our wide range of automatic air valves ensures we have the right valve to maintain an air free system.

And when it’s necessary to isolate a pump, process or section of pipeline, you can depend on GA Industries butterfly valves for reliable flow shutoff.

GA Figure 7125:
Tilting Disc Check Valve, Plain
GA Figure 7125 Image
Size: 6" to 36"
Valve Type: Check Valve
Fluid: Water

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries