GA Figure 935SS:

Air & Vacuum Valve for Sewage, Durovent All SS

Size: 2" x 1" to 3" x 2"
Valve Type: Air Valve
Fluid: Wastewater

VAG GA Industries Figure 935SS Air & Vacuum Valves efficiently vent air and sewage gas from sewage forcemains as they are being filled and then close tight once the system is full and pressurized.They automatically open to admit air to limit vacuum formation when the forcemain is drained and/or a negative pressure occurs in the valve.

Whether due to the fluid itself or ambient conditions, Durovent® Wastewater Air Release Valves provide the ultimate in corrosion resistance since the body, cover, float, internal linkage, external fasteners and pipe plugs are all made from Type 316 stainless steel.

Figure 935SS Air & Vacuum Valves are typically installed at system high points where air and sewage gas naturally rise during filling and vacuum first forms during draining.The elongated body is designed to maintain an air gap between the solids bearing fluid and the valve's internal mechanism to minimize fouling and spillage.

Figure 935SSF includes optional 'back flushing attachments' to facilitate cleaning sludge and debris from the valve

  • Full size orifice for maximum air outflow and inflow rates
  • Rugged, heavy duty cast 316 stainless steel body - no potential for weld corrosion
  • Corrosion resistant Type 316 stainless steel float, plug, seat ring and internal mechanism - no plastic components
  • Tight sealing and easily replaceable rubber seat
  • 2” NPT plugged port allows removal of large debris
  • Body & Cover: Stainless Steel, Type 316
  • Float: Stainless Steel, Type 316
  • Internal Linkage: Stainless Steel, Type 316
  • Replaceable Seat: Buna-N
  • External Fasteners: Stainless Steel, Type 316
  • Pipe Plugs: Stainlees Steel, Type 316
Drawings and Parts List
Drawing EAV7105SFW-A (2x1" to 3x2" Valve + Backflush)
Drawing EAV7105SW-A 2x1" to 3x2" (Valve)
Installation, Maintenance and Operating Instructions
IOM Figure 935SS 111120
Product Bulletin
Air Valve Bulletin VAG16 LR
Sample Specification
Durovent Air Vacuum For Sewage Rev B
Technical Datasheet
Air Valve Sizing For Pipeline Filling and Draining
Figure 935SS Data Sheet 935SS-01D
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now

Reliable wastewater valves designed for rigorous service

GA Industries sewage and wastewater valves are specially designed to accommodate the rigorous demands of the sewage collection, pumping and treatment process.

Whether a large regional sewage pump station, a small lift station or in-plant process pumping, GA Industries line of wastewater check, pump control and surge relief valves provide reliable service under difficult operating conditions. GA Industries ECO-Centric® plug valves handle solids and stringy material and are used in sewage and wastewater systems for pump, pipeline or process isolation.

Our full range of sewage and wastewater air valves automatically release air and sewage gas from forcemains to maintain pumping efficiency and minimize pipeline corrosion.

GA Figure 935SS:
Air & Vacuum Valve for Sewage, Durovent All SS
GA Figure 935SS Image
Size: 2" x 1" to 3" x 2"
Valve Type: Air Valve
Fluid: Wastewater

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries