GA Figure 804:

AWWA Butterfly Valve, Exposed Service

Size: 3" to 24"
Valve Type: Butterfly Valve
Fluid: Water

GA Industries 3” to 24” Series 800 ANSI Class 125 flanged exposed service butterfly valves meet the requirements of AWWA C504 Pressure Class 150B and 250B and are NSF-61 certified for contact with drinking water.  They are rugged, versatile and dependable valves routinely used in water filtration plants, pumping stations, pipelines and power plants to isolate equipment or systems. 

Series 800 butterfly valves are standard with a high strength ductile iron body with a molded and vulcanized EPDM-P rubber seat.The disc is also ductile iron with a 316 stainless steel seat edge that seals against the rubber seat in the body.The valves shut off drop tight in both directions at both low and high pressure. 

Series 800 exposed service AWWA butterfly valves are available with a 10-position manual lever up to 8” size and all sizes can be supplied with a worm gear operator and handwheel (optional chainwheel) or 2” nut.   Electric motor and pneumatic actuation are also available.

  • NSF-61 and NSF-372 certified
  • Class 150B or 250B with ANSI Class 125 flanged ends
  • Epoxy coated high strength ductile iron body and disc
  • Rubber lined body with integral rubber seat
  • Streamlined lens shaped disc for low headloss
  • Bi-directional zero leakage up to full rated pressure
  • Integral FA actuator mounting flange, eliminates brackets
  • Body - Ductile Iron
  • Disc - Ductile Iron with 316SS Seat Edge
  • Shaft - Type 304 Stainless Steel
  • Seat - EPDM-P Rubber (Optional Buna-N)
  • Bearings (3” to 24”) - PTFE Lined 304 SS
  • Bearings (30” and larger) - Composite
Corrosion Protection
  • Internal and external coating NSF-61 certified epoxy, minimum 6 mil DFT
Drawings and Parts List
Fig 804 16-24in FLG Drawing BF-1020
Fig 804 FLG 3-14in Drawing BF-1015
Fig 804 FLG 3-8in Lever Operator Drawing BF-1013
Installation, Maintenance and Operating Instructions
Series 800 IOM 060420 (3" to 24")
Sample Specification
Series 800 Butterfly Valves Rev C
Technical Datasheet
3-24in Series 800 Bfv Headloss Rev B
3-24in Series 800 Disc Angle Vs Cv Rev B
Series 800 3"-24" Exposed Service Data Sheet 800-01D
Find the Right Representative for You.

We can help you find the correct representative for your industry & location.

Once you find the right representative you can save them to your account and their contact info will appear thoughout the website.

Set-up Now
Clean Water

Dependable valves that meet your clean water needs

From the raw water intake to the filtration plant to the finished waster distribution and storage system, GA Industries valves have been providing dependable service in large and small water systems. GA Industries pump control, check and relief valves mitigate damaging pressure surges and eliminate slam and bang that can result from the operation of water pumps.

Our full range of pilot operated control valves regulate distribution system pressure and prevent overflow of storage tanks and reservoirs. Air trapped in water pipelines can reduce system efficiency and exacerbate pressure surges. Our wide range of automatic air valves ensures we have the right valve to maintain an air free system.

And when it’s necessary to isolate a pump, process or section of pipeline, you can depend on GA Industries butterfly valves for reliable flow shutoff.

GA Figure 804:
AWWA Butterfly Valve, Exposed Service
GA Figure 804 Image
Size: 3" to 24"
Valve Type: Butterfly Valve
Fluid: Water

Project Location

Please choose a region & language
GlobalVAG Group
English Deutsch Français Español
AfricaVAG Group
PolskaVAG Group
РоссияVAG Group
Deutschland, Österreich, SchweizVAG Group
Česká republikaVAG Group
中国VAG Group
中文 English
USA, CanadaVAG Group
USA, CanadaGA Industries